Posts in "Hackintosh"

macOS Mojave Hackintosh on Intel Core i7 8700K

macOS Mojave is here with brand new Dark Mode and a lot more new tools.

macOS Mojave on Intel Core i7 8700K

MacOS High Sierra to Mojave upgrade is also possible instead of clean Installation. All you’ve to do is to download the installer from the Appstore. Download size is around 6GB. Once the Installer is downloaded. Open it and wait for a few minutes. After it restarts, installation continues if the macOS high sierra Installation kext files are there. And if Installation freezes, boot your computer using your USB with the previous installer. All you need is the EFI partition config file and kexts to boot it to continue the Installer. After installation completes, you can boot right into macOS Mojave. Dark mode is there and a lot goodies. Screenshot and screen recording app are also there. Voice memos is also possible in macOS Mojave.

macOS Mojave Installation on PC

Last week, I did some experiments with the newly macOS Mojave. I upgraded my system after downloading the update of macOS Mojave which was around 7GB in size. After playing with the config files for basic functionality of all the hardware. I made up mind to do a clean install for you people. I’ve uploaded the complete tutorial on my YouTube Channel with 2 methods for bootable USB creation.

macOS Mojave has native support for several Intel graphics. That’s why no fake IDs are required in macOS Mojave for most of Intel graphics.

SYSTEM SPECS :

Intel Core i7 8700K ASUS Prime Z370P MSI LIGHTNING X 1080Ti 11GB Corsair Vengeance RGB 16GB Samsung SSD 850 EVO  Transend SSD 370 256GB Seagate Barracuda 2TB Seagate 1TBBENQ RL2755

Prerequisites

  1. Purchase a 16GB or larger USB drive.
  2. Do a full backup of your system. Use a separate HDD or SSD for installation.
Note In order to start fresh, you’ll need access to a functional computer running macOS. This is a requirement, as you need access to the Mac App Store to download macOS and create the installation drive.

STEP 1: Download macOS Mojave

The full operating system is a free download for anyone. Download the Application from the Mac App Store using your Apple ID on any Mac.

Open Mac App Store and Download macOS Mojave from the Appstore using your account.

Note The Application Install macOS Mojave will appear in /Applications.

STEP 2: Create a Bootable USB Drive with UniBeast

1. Insert the USB drive
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column
4. Click Erase button
5. For Name: type USB (You can rename it later)
6. For Format: choose OS X Extended (Journaled)
7. For Scheme: choose GUID Partition Map
8. Click Erase then Done
9. Download and run UniBeast
10. Click Continue, Continue, Continue, Continue, Agree
11. At Destination Select, choose USB and click Continue
12. At Select, OS Installation screen choose Sierra and click Continue
13. At Bootloader Options screen choose UEFI Boot Mode or Legacy Boot Mode. UEFI Boot Mode is recommended for 7/8/9/100 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
14. (Optional) At Graphics Configuration screen choose the appropriate graphics option for your system and click Continue.
15. Verify installation options, then click Continue, enter a password and click Install

UniBeast will now create the bootable USB drive. The process will only take about 10 minutes, depending on system and drive speed. Do not unplug or stop during this time.

Mount the EFI partition using Clover Configurator

Open Config file with clover and follow the on-screen options.
In Boot tab, Make sure dart=0 and Nv_disable=1 is selected.
In devices, Under USB
Select Inject, Add clock ID and Fix Ownership.

From GUI, Select your screen resolutions.

In RT Variable tab, Change CsrActiveConfig value to 0x3.

In SM Bios, Select the configuration that matches with your processor.

Save the config file.

16. Now copy all utilities in the macOS Bootable USB.

Clover Note  UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.

STEP 3: Recommended BIOS Settings

Note If you’re installing on a recommended CustoMac desktop with AMI UEFI BIOS, the options are simple. For other systems make sure to set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. Here are standard MSI AMI UEFI BIOS.

To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
Load Optimized Defaults
Disable VT-d
then Disable CFG-Lock
and Disable Secure Boot Mode
Save and exit.

STEP 4: Install mac OS Mojave

You’re almost done! All you need to do is boot from the USB drive and install!

For best results, insert the USB in a USB 2.0 port.

1. Turn on the computer
2. Press the hotkey to choose boot device (F11)
3. Choose USB
4. At Clover boot screen, choose Boot Mac OS from USB
5. When you arrive at the Installer, choose a language.

If you have issues reaching the installer, first make sure you’re using a USB 2.0 port. If you’re using an NVIDIA graphics card you may need to enter the extra boot flag nv_disable=1 to reach the installer. For instructions on entering boot, flags see Clover Basics and Switching Advice.

For a new installation of macOS Mojave, you MUST erase and format the destination drive according to the following steps before continuing. Format the SSD using MacOS Extended Journaled and GUID Partition Map. When the installer asks you where to install, choose macOS Mojave, or your existing install.

The system will restart several times during installation.

STEP 5: Post Installation

Download clover from this website. Install clover in your SSD where you’ve installed macOS Mojave.

After installation is complete. Open the EFI partition of your SSD and copy files from the USB to EFI folder of macOS SSD.

Open Config file

Boot Options, Inject Nvidia and dart=0.

In SM Bios select 14,2 for Haswell and coffelake, Select iMac 17,1 for Skylake

If using a NVIDIA ‘Maxwell’ GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti, or TITAN X graphics card, mac OS graphics drivers are not natively supported. Alternate NVIDIA drivers are required. Newer Nvidia cards are not supported with full graphic acceleration.

12. (Optional) Download and install Alternate NVIDIA Graphics Drivers
13. Reboot

*Also download Nvidia Kext and copy all to other Kext folders.

FAQS

You can check your audio and Ethernet controller from the detailed specification of your Motherboard.
Google it or visit official product website. For Example

MSI SPECIFICATIONS

Install and Enable Nvidia Web Driver in Hackintosh

NVIDIA WEB DRIVER

 

You now have a fully updated bootable version of mac OS Moajve on your CustoMac! And a USB rescue drive if something goes wrong.

macOS High Sierra Hackintosh on Intel Core i7 8700K

New Year, New computer

macOS High Sierra on Intel Core i7 8700K

I decided to upgrade my 4th generation Intel core i7 4790K devil’s canyon to an 8th Generation Intel Core i7 8700K for macOS High Sierra Hackintosh. I’ve been using that 4th generation processor for almost 3 years and I wasn’t disappointed with my choice 3 years ago. Intel Core i7 4790K have 4.0 GHz base clock and 4.4 GHz boost Clock, It can be overclocked to 4.8Ghz. It was sufficient for my gaming needs before I started making videos and rendering scenes. 4 cores are somehow outdated if you’re a pro user and want to do multitasking like video editing, 3D modeling, rendering, animation and simulation for engineering projects. I was able to build a Hackintosh out of that 4th generation build with ease and I was using this for all of my video editing tasks. Intel HD 4600 and Nvidia Gtx 970 were more than enough for me while editing videos in 1080P and 4K occasionally.

This year I decided to upgrade to the latest core i7 8700K has more cores than previous generation processor. Also, It can be overclocked to 5.0 Ghz. Intel Core i7 8700K has Intel UHD graphics 630 which is much better in terms of performance. I also have the Ryzen processor but it is not feasible to make a Hackintosh out of it due to unavailability of Intel graphics.

macOS High Sierra Installation on PC using Unibeast, multibeast and Clover Configurator

macOS High Sierra installation was simple on this newly assembled computer. I’ve added complete macOS High Sierra Hackintosh system specification below. All you have to do is to follow the steps and you can create a Hackintosh without any hassle. The only issue is that I wasn’t able to get Msi Lightning 1080Ti working on this build. I’ll update as soon as I find any way to fix it.

SYSTEM SPECS :

Intel Core i7 8700K ASUS Prime Z370P MSI LIGHTNING X 1080Ti 11GB Corsair Vengeance RGB 16GB Samsung SSD 850 EVO  Transend SSD 370 256GB Seagate Barracuda 2TB Seagate 1TBBENQ RL2755

Prerequisites

1. Register at tonymacx86! If you don’t have a user account, create one!
2. Get latest UniBeast and MultiBeast tools from the downloads section.
3. Purchase a 16GB or larger USB drive.
4. Do a full backup of your system. Use a separate HDD or SSD for installation.

UniBeast is a tool that creates a bootable installer out of your downloaded version of macOS.

Note In order to start fresh, you’ll need access to a functional computer running macOS. This is a requirement, as you need access to the Mac App Store to download macOS and create the installation drive.

STEP 1: Download macOS High Sierra

The full operating system is a free download for anyone. Download the Application from the Mac App Store using your Apple ID on any Mac.

1. Open Mac App Store
2. Log in with your Apple ID
3. Download macOS High Sierra

Note The Application Install macOS High Sierra will appear in /Applications.

STEP 2: Create a Bootable USB Drive with UniBeast

1. Insert the USB drive
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column
4. Click Erase button
5. For Name: type USB (You can rename it later)
6. For Format: choose OS X Extended (Journaled)
7. For Scheme: choose GUID Partition Map
8. Click Erase then Done
9. Download and run UniBeast
10. Click Continue, Continue, Continue, Continue, Agree
11. At Destination Select, choose USB and click Continue
12. At Select OS Installation screen choose Sierra and click Continue
13. At Bootloader Options screen choose UEFI Boot Mode or Legacy Boot Mode. UEFI Boot Mode is recommended for 7/8/9/100 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
14. (Optional) At Graphics Configuration screen choose the appropriate graphics option for your system and click Continue.
15. Verify installation options, then click Continue, enter a password and click Install

UniBeast will now create the bootable USB drive. The process will only take about 10 minutes, depending on system and drive speed. Do not unplug or stop during this time.

Mount the EFI partition using Clover Configurator

Now open clover configurator and mount the EFI partition.
Go to Kext Copy apfs.efi to “Other” Kext folder.

Also copy apfs.efi to drivers folder.

Open Config file with clover and follow the on-screen options.
In Boot tab, Make sure dart=0 and Nv_disable=1 is selected.
In devices, Under USB
Select Inject, Add clock ID and Fix Ownership.

From GUI, Select your screen resolutions.

In RT Variable tab, Change CsrActiveConfig value to 0x67.

In SM Bios, Select the configuration that matches with your processor.

Save the config file.

16. Now copy all utilities in the macOS Bootable USB.

Clover Note  UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.

STEP 3: Recommended BIOS Settings

Note If you’re installing on a recommended CustoMac desktop with AMI UEFI BIOS, the options are simple. For other systems make sure to set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. Here are standard MSI AMI UEFI BIOS.

To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
Load Optimized Defaults
Disable VT-d
then Disable CFG-Lock
and Disable Secure Boot Mode
Save and exit.

STEP 4: Install mac OS Sierra

You’re almost done! All you need to do is boot from the USB drive and install!

For best results, insert the USB in a USB 2.0 port.

1. Turn on the computer
2. Press the hotkey to choose boot device (F11)
3. Choose USB
4. At Clover boot screen, choose Boot Mac OS from USB
5. When you arrive at the Installer, choose language.

If you have issues reaching the installer, first make sure you’re using a USB 2.0 port. If you’re using a NVIDIA graphics card you may need to enter the extra boot flag nv_disable=1 to reach the installer. For instructions on entering boot flags see Clover Basics and Switching Advice.

6. For a new installation of macOS High Sierra, you MUST erase and format the destination drive according to the following steps before continuing.

a. In the top menu bar choose Utilities and open Disk Utility
b. Highlight your target drive for the macOS High Sierra installation in left column.
c. Click Erase button
d. For Name: type macOS High Sierra (You can rename it later)
e. For Format: choose macOS Extended (Journaled)
f. For Scheme: choose GUID Partition Map
g. Click Erase
h. Close Disk Utility

7. When the installer asks you where to install, choose macOS High Sierra, or your existing install.
8. The system will restart several times during installation.

STEP 5: Post Installation with MultiBeast

MultiBeast is an all-in-one post-installation tool designed to enable boot from hard drive, and install support for Audio, Network, and Graphics. The installation is complete, but the drive isn’t bootable yet. Boot from the USB again, this time choosing macOS High Sierra.

1. Turn on the computer
2. Press the hotkey to choose boot device
3. Choose USB
4. At the Boot Screen, choose your new macOS High Sierra installation.
5. Complete macOS High Sierra setup
6. Open and run MultiBeast. If your system requires installing Clover to the root of the drive, such as Gigabyte 6 Series and X58 systems, skip to STEP 6.
7. If this is a fresh installation, click Quick Start. UEFI Boot Mode is recommended for 7/8/9+ Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
8. Choose the appropriate audio and network options for your system: (Check FAQS)
9. Click Customize for further options
10. Click Print or Save to back up your configuration
11. Click Build then Install

If using a NVIDIA ‘Maxwell’ GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti, or TITAN X graphics card, mac OS graphics drivers are not natively supported. Alternate NVIDIA drivers are required.

12. (Optional) Download and install Alternate NVIDIA Graphics Drivers
13. Reboot

Open clover configurator from flash drive and mount the EFI Partitions.
Now copy everything from EFI partition of flash drive to EFI partition of macOS installation SSD.

*Also download Nvidia Kext and copy all to other Kext folders.

FAQS

You can check your audio and Ethernet controller from the detailed specification of your Motherboard.
Google it or visit official product website. For Example

MSI SPECIFICATIONS

Install and Enable Nvidia Web Driver in Hackintosh

NVIDIA WEB DRIVER

Enable HDMI Audio in Hackintosh

DOWNLOAD

 

You now have a fully updated bootable version of mac OS High Sierra on your CustoMac! And a USB rescue drive if something goes wrong.

 

macOS High Sierra Hackintosh Issues and Solutions

macOS High Sierra Hackintosh Issues and Solutions

macOS High Sierra Hackintosh Issues and Solutions

macOS High Sierra Hackintosh Issues and Solutions

As you know there are a lot of hardware configuration out there. So the solution might be different in your case. Although, you can always check forums to find the best Mac compatible hardware. Many users are facing issues while using 1060 in Hackintosh. In my first Hackintosh, I used a GTX 970 with Intel Core i7 4790K. I upgraded this build to macOS High Sierra and it was working fine. No graphics or sound issues. I only switched to 3rd party Wifi Adapter to connect to the internet.

When you plug in the USB and boot from it, you’ll get a black screen. That happens because of your motherboard compatibility. While creating bootable USB you have two options to choose from. You can either select UEFI BOOT MODE or LEGACY BOOT MODE. Whenever you face this issue, try to swap between the boot modes. Also, make sure to change the required settings from Bios. You have to disable VT-d, CFG Lock from Bios. Also, enable support for other OS.

Another issue is getting Stop or Prohibitory sign after loading completes.

You get this sign when you’re installing macOS on your old installation of macOS. I fixed it by formatting the SSD before getting into the installer. By doing this all config files were removed from the SSD.

Sometime you’ll be stuck at loading screen. You’ll either have loading stopped at halfway or sometimes you get a circular loading animation below loading bar and Apple Logo. This issue is due to your GPU. There is another case when you get a black screen after the loading is completed. That is also because of your GPU. In some cases, your system restarts after loading completes.

So how to fix it.

Here is the quick fix. That worked for my hardware configuration.

Disable your Nvidia Graphic Card using Clover boot flags. Inject Nvidia if you haven’t done this before. If you’re using latest clover version there are some other options in graphics menu, check them all and you’ll be able to boot into macOS Installer.

Some of you might be unable to format the partition after getting into macOS, the solution is simple, select the view mode from the top and show all devices. Now format the drive, not the partition.

Another issue is that Multibeast installation fails. You can resolve this by exiting the installer. Mount the EFI partitions using clover configurator and then do post installation using Multibeast.

If your system is not booting properly after reboot and you’re facing one of the already mentioned issues, then your graphics are not enabled properly. Or you have selected wrong SM Bios settings.

If you’re getting no sound from HDMI, you have to run a script to enable HDMI audio. It takes few minutes to install. I’ll put the link in the description.

If you’re having blurry graphics or stuttering, you should install and enable proper Nvidia drivers to run your graphics card at full potential.

If your Graphics memory 0MB in “about this mac” section, then you don’t have proper drivers installed. Or you haven’t enabled Nvidia drivers from clover configurator.

 

macOS High Sierra Hackintosh – MSI Motherboard

macOS High Sierra Installation on PC using Unibeast, multibeast and Clover Configurator

macOS High Sierra hasn’t had a massive interface overhaul like the one Yosemite bought in 2014, and despite the fact that many of the features gained by its bundled apps feel a little like it is playing catch up with iOS, this version of macOS actually has a lot going on behind the scenes.

In High Sierra Apple has replaced the primary file system of MacOS. Apple File System (APFS) is the successor to the old Hierarchical File System (HFS+), which has been around since the beginning of 1998, so it’s pretty ancient.

That’s not the only way that Apple’s switch to APFS will benefit you. When it comes to copying large files the process will be faster. We ran our usual file transfer speed test before and after the update to High Sierra. This involved copying a 4GB file. Before we updated the 4GB file copy took 8.41 seconds. Afterwards it was instantaneous. You will never see a Duplicating file window again.

HEVC stands for high efficiency video codec, and it’s another name for H.265, the successor to H.264. The new codec is necessary because video sizes are now so much larger thanks to 4K and HDR. HEVC compresses these extremely high resolution files so they don’t take up take up as much space (which is good news if you are shooting lots of video in 4K on your iPhone 8 Plus).

A couple of years ago Apple introduced Metal, a framework that bypassed OpenGL and allowed developers to tap in to the computational power of the graphics processor. Metal 2 is the successor to Metal and it will increase GPU performance and gain support for VR.

This is great news for anyone who wants to immerse themselves in VR gaming – but note that your Mac may not be able to take advantage of this as it depends on your processor and your GPU (but it will add support for external GPUs in the future).

SYSTEM SPECS :

Intel Core i7 4790K MSI Z97S Krait SLI Gigabyte GTX 970 G1 Gaming Corsair 16GB DDR3 Intel SSD 128GB  Transend SSD 370 256GB Seagate Barracuda 2TB Seagate 1TBBENQ RL2755

Pre requisites

1. Register at tonymacx86! If you don’t have a user account, create one!
2. Get latest UniBeast and MultiBeast tools from the downloads section.
3. Purchase a 16GB or larger USB drive.
4. Do a full backup of your system. Use a separate HDD or SSD for installation.

UniBeast is a tool that creates a bootable installer out of your downloaded version of macOS.

Note In order to start fresh, you’ll need access to a functional computer running OS X Lion 10.7.5 or later. This is a requirement, as you need access to the Mac App Store to download macOS and create the installation drive.

STEP 1: Download macOS High Sierra

The full operating system is a free download for anyone who has purchased Mac OS X Snow Leopard, Lion, or Mountain Lion or has a Mac preloaded with OS X Mavericks, Yosemite, El Capitan, or macOS High Sierra. Download the Application from the Mac App Store using your Apple ID on any Mac or functional computer running OS X 10.7.5 or later.
1. Open Mac App Store
2. Log in with your Apple ID
3. Download macOS High Sierra

Note The Application Install macOS High Sierra will appear in /Applications.

STEP 2: Create a Bootable USB Drive with UniBeast

1. Insert the USB drive
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in left column
4. Click Erase button
5. For Name: type USB (You can rename it later)
6. For Format: choose OS X Extended (Journaled)
7. For Scheme: choose GUID Partition Map
8. Click Erase then Done
9. Download and run UniBeast
10. Click Continue, Continue, Continue, Continue, Agree
11. At Destination Select, choose USB and click Continue
12. At Select OS Installation screen choose Sierra and click Continue
13. At Bootloader Options screen choose UEFI Boot Mode or Legacy Boot Mode. UEFI Boot Mode is recommended for 7/8/9/100 Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
14. (Optional) At Graphics Configuration screen choose the appropriate graphics option for your system and click Continue.
15. Verify installation options, then click Continue, enter password and click Install

UniBeast will now create the bootable USB drive. The process will only take about 10 minutes, depending on system and drive speed. Do not unplug or stop during this time.

Mount the EFI partition using Clover Configurator

Now open clover configurator and mount the EFI partition.
Go to Kext Copy apfs.efi to “Other” Kext folder.

Also copy apfs.efi to drivers folder.

Open Config file with clover and follow the on-screen options.
In Boot tab, Make sure dart=0 and Nv_disable=1 is selected.
In devices, Under USB
Select Inject, Add clock ID and Fix Ownership.

From GUI, Select your screen resolutions.

In RT Variable tab, Change CsrActiveConfig value to 0x67.

In SM Bios, Select the configuration that matches with your processor.

Save the config file.

16. Now copy all utilities in the macOS Bootable USB.

Clover Note  UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.

STEP 3: Recommended BIOS Settings

Note If you’re installing on a recommended CustoMac desktop with AMI UEFI BIOS, the options are simple. For other systems make sure to set your BIOS to Optimized Defaults, and your hard drive to AHCI mode. Here are standard MSI AMI UEFI BIOS.

To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
Load Optimized Defaults
Disable VT-d
Disable CFG-Lock
Disable Secure Boot Mode
Save and exit.

STEP 4: Install mac OS Sierra

You’re almost done! All you need to do is boot from the USB drive and install!

For best results, insert the USB in a USB 2.0 port.

1. Turn on the computer
2. Press the hotkey to choose boot device (F11)
3. Choose USB
4. At Clover boot screen, choose Boot Mac OS from USB
5. When you arrive at the Installer, choose language.

If you have issues reaching the installer, first make sure you’re using a USB 2.0 port. If you’re using a NVIDIA graphics card you may need to enter the extra boot flag nv_disable=1 to reach the installer. For instructions on entering boot flags see Clover Basics and Switching Advice.

6. For a new installation of mac OS Sierra, you MUST erase and format the destination drive according to the following steps before continuing.

a. In the top menu bar choose Utilities, and open Disk Utility
b. Highlight your target drive for the macOS High Sierra installation in left column.
c. Click Erase button
d. For Name: type macOS High Sierra (You can rename it later)
e. For Format: choose mac OS Extended (Journaled)
f. For Scheme: choose GUID Partition Map
g. Click Erase
h. Close Disk Utility

7. When the installer asks you where to install, choose macOS High Sierra, or your existing install.
8. The system will restart several times during installation.

STEP 5: Post Installation with MultiBeast

MultiBeast is an all-in-one post-installation tool designed to enable boot from hard drive, and install support for Audio, Network, and Graphics. The installation is complete, but the drive isn’t bootable yet. Boot from the USB again, this time choosing macOS High Sierra.

1. Turn on the computer
2. Press the hotkey to choose boot device
3. Choose USB
4. At the Boot Screen, choose your new macOS High Sierra installation.
5. Complete mac OS Sierra setup
6. Open and run MultiBeast. If your system requires installing Clover to the root of the drive, such as Gigabyte 6 Series and X58 systems, skip to STEP 6.
7. If this is a fresh installation, click Quick Start. UEFI Boot Mode is recommended for 7/8/9+ Series CustoMac desktops and all UEFI capable systems. Legacy Boot Mode is recommended for 5/6 Series CustoMac desktops and all BIOS based systems.
8. Choose the appropriate audio and network options for your system: (Check FAQS)
9. Click Customize for further options
10. Click Print or Save to back up your configuration
11. Click Build then Install

If using a NVIDIA ‘Maxwell’ GeForce GTX 750, 750 Ti, 950, 960, 970, 980, 980 Ti, or TITAN X graphics card, mac OS graphics drivers are not natively supported. Alternate NVIDIA drivers are required.

12. (Optional) Download and install Alternate NVIDIA Graphics Drivers
13. Reboot

Open clover configurator from flash drive and mount the EFI Partitions.
Now copy everything from EFI partition of flash drive to EFI partition of macOS installation SSD.

*Also download Nvidia Kext and copy all to other Kext folders.

FAQS

You can check your audio and Ethernet controller from the detailed specification of your Motherboard.
Google it or visit official product website. For Example

MSI SPECIFICATIONS

Install and Enable Nvidia Web Driver in Hackintosh

NVIDIA WEB DRIVER

Enable HDMI Audio in Hackintosh

DOWNLOAD

 

 

You now have a fully updated bootable version of mac OS High Sierra on your CustoMac! And a USB rescue drive if something goes wrong.